|
Vandal Bayliss 1 Graphics Helmets
Description: Aggressive design with all the comfort and features found on helmets that cost much more. Ultra-lightweight, bag-molded Structurally Enhanced Composite (S.E.C.) fiber weave helmet shell. Two shell sizes for optimal fit; helmet weighs just 1250g. Dynamically Variable Resistance Crumple zones and Advanced Channel EPS provide amazing air flow and impact energy absorption. Sound-absorbing polymers offer a quiet ride. Reversible upper Åantennae intake/exhaust ports on the front and dual Åaero spike exhaust ports on the back for the ultimate in ventilation. Removable and washable 3D comfort liner and cheek pads; liner hypo-allergenic, anti-bacterial and is made of special anti-nap fabric that will not fray. Clear, high optics, anti-scratch, anti-fog shield; no side cover for easy removal and replacement with shield fully open. Oversized sponge cervical neck roll. Breath deflector. D-ring closure. Race-approved by every major U.S. motorcycle race organization; DOT and B.S.I. 6658 Type A (British Standards Institution) certified.
Price:
$499.95
|
|
Spec-1R Extreme Flowers Helmets
Description: Pushing the limit is what "extreme" is all about, and Suomys new Spec-1R Extreme sets a new standard. In addition to the above standard Spec-1R features, the Extreme offers remarkable technological advancements that push helmet technology to the Extreme. This incredible helmet is an enhanced version of Suomys top rated Spec-1R, featuring: The lightest weight (1250 grams), race approved helmet available 3 shell sizes for ultimate fit DVRC (Dynamically Variable Resistance Crush Zone designed into the EPS) Removable washable 3D cheek pads (allows for adjustable custom fit) Removable washable Comfort liner (allows for adjustable custom fit) Anti-Fog / Anti -Scratch Face Shield Sound Absorbing Polymers Safety Lock visor system Breath Deflector S.E.C." (Structurally Enhanced Composite Fiber Weave) Hot Cured Bag Molded construction Oversized sponge cervical neck roll Advanced Channeled EPS for optimum venting Race approval by every major US Motorcycle Race Organization DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls Ultra Tech Face Shield - Standard to the Extreme is a unique face shield incorporating a beautifully translucent Opalescent Iridium finish with a special hydrophobic coating - this allows water to easily roll off the surface of the shield, an anti-IR coating to block heat and keep the riders face cool, and a state-of-the-art anti-fog coating. And thats just the face shield! Alcantara - Used in the finest exotic sports cars and top class furnishings, Alcantara is a luxurious fabric offering a level of softness, comfort and quality never before seen in the helmet market. Now, Alcantara is being used exclusively for the Spec-1R Extremes comfort liner, providing a perforated chamois-like material for ultimate comfort, water wicking, coolness and durability. Ram Air Intake - The Spec 1R Extreme comes standard with this new cooling device. Located above the top of the forehead, this specially designed intake duct forces air into the helmet body in the open position, pressurizing cool air into the Spec 1Rs unique waffled EPS channeled system. Flipping the switch to the off position on the Intake Duct closes the ram air intake from the rest of the system. Air Wedge Top Diffuser - An extreme helmet deserves an extreme top diffuser and the new, Suomy Air Wedge is just that: designed to work in concert with the Ram Air Intake duct, the Air Wedge performs the duty of extracting hot air from the helmet body and out the back of the wedge. Its aggressive design provides a further function; the Air Wedge creates vortices towards the back of the helmet, defeating the potential for helmet lift at high speeds providing an extremely stable helmet, even at Daytona speeds. Ultimate Graphics - Suomy is renowned for its top quality graphics. The Extreme series of the Spec-1R helmet come with graphics that once again raise the bar for helmet graphics everywhere. Combining Suomys state-of-the-art graphic technology with a unique series of base paints and ultra-smoothclear coating put the ultimate finish on these outstanding helmets.
Price:
$519.96
|
|
X-Eleven Metallic Helmet
Description: Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders' feedback. The Aero Edge Spoiler dramatically reduces drag and lift coefficients, thus diminishing rider fatigue and increasing performance. Offers unmatched ventilation with internal channels and exhaust ports throughout the helmet. The Dual Air Charge system: A forehead lower intake and a forehead upper"Air Scoop II", combine to maximize flow-through ventilation. Outlet holes in the Aero Edge Spoiler allow warm air to be exhausted. The lower air intake provides an additional source of air flow. The neck outlet vent allows for effective air exhaust. High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient. Exhaled air is absorbed into the"Breath Chamber II" and exhausted by negative air pressure, thus eliminating shield fogging. The lower air intake provides air flow that helps to diminish shield fogging. The entire interior lining (cheek pads, upper liner and chin strap covers) is easily removed to allow for cleaning and/or replacement. Each component of the inner liner is ergonomically designed to offer safety, fit and comfort. Neatly secures chin strap. Q.R.B.P. (Quick-Release Base Plate) allows toolless shield removal. A wide, 3-dimensionally curved shield offers increased peripheral vision and optical clarity. Scratch-resistant coating. 100% protection from harmful UV A & B rays. A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly. Shield cleaning kit included
Price:
$540.49
|
|
Spec-1R Extreme Fabrizio Helmets
Description: Pushing the limit is what "extreme" is all about, and Suomys new Spec-1R Extreme sets a new standard. In addition to the above standard Spec-1R features, the Extreme offers remarkable technological advancements that push helmet technology to the Extreme. This incredible helmet is an enhanced version of Suomys top rated Spec-1R, featuring: The lightest weight (1250 grams), race approved helmet available 3 shell sizes for ultimate fit DVRC (Dynamically Variable Resistance Crush Zone designed into the EPS) Removable washable 3D cheek pads (allows for adjustable custom fit) Removable washable Comfort liner (allows for adjustable custom fit) Anti-Fog / Anti -Scratch Face Shield Sound Absorbing Polymers Safety Lock visor system Breath Deflector S.E.C." (Structurally Enhanced Composite Fiber Weave) Hot Cured Bag Molded construction Oversized sponge cervical neck roll Advanced Channeled EPS for optimum venting Race approval by every major US Motorcycle Race Organization DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls Ultra Tech Face Shield - Standard to the Extreme is a unique face shield incorporating a beautifully translucent Opalescent Iridium finish with a special hydrophobic coating - this allows water to easily roll off the surface of the shield, an anti-IR coating to block heat and keep the riders face cool, and a state-of-the-art anti-fog coating. And thats just the face shield! Alcantara - Used in the finest exotic sports cars and top class furnishings, Alcantara is a luxurious fabric offering a level of softness, comfort and quality never before seen in the helmet market. Now, Alcantara is being used exclusively for the Spec-1R Extremes comfort liner, providing a perforated chamois-like material for ultimate comfort, water wicking, coolness and durability. Ram Air Intake - The Spec 1R Extreme comes standard with this new cooling device. Located above the top of the forehead, this specially designed intake duct forces air into the helmet body in the open position, pressurizing cool air into the Spec 1Rs unique waffled EPS channeled system. Flipping the switch to the off position on the Intake Duct closes the ram air intake from the rest of the system. Air Wedge Top Diffuser - An extreme helmet deserves an extreme top diffuser and the new, Suomy Air Wedge is just that: designed to work in concert with the Ram Air Intake duct, the Air Wedge performs the duty of extracting hot air from the helmet body and out the back of the wedge. Its aggressive design provides a further function; the Air Wedge creates vortices towards the back of the helmet, defeating the potential for helmet lift at high speeds providing an extremely stable helmet, even at Daytona speeds. Ultimate Graphics - Suomy is renowned for its top quality graphics. The Extreme series of the Spec-1R helmet come with graphics that once again raise the bar for helmet graphics everywhere. Combining Suomys state-of-the-art graphic technology with a unique series of base paints and ultra-smoothclear coating put the ultimate finish on these outstanding helmets.
Price:
$519.96
|
|
Ventura Multi Helmets
Description: Ultra-Light weight at 1250 grams 2 shell sizes to maximize fit Sound Absorbing Polymers High optics anti-scratch, anti-fog shield S.E.C. (Structurally Enhanced Composite Fiber Weave) Hot Cured Bag Molded construction Over sized sponge cervical neck roll Breath deflector Closable delta top diffusers Race approval by every major US motocycle race organization DOT approved and Certified to BSI 6658 type A: Providing unprecedented pre public release batch testing of each production run, providing exacting quality controls.
Price:
$199.96
|
|
Impact Skin
Description: Removable Biofoam hip pads. Synthetic chamois saddle for comfort Stretch Lycra material
Price:
$29.66
|
|
Short Skin
Description: Synthetic chamois saddle for comfort Firm elastic waist with drawstring Stretch Lycra material
Price:
$25.16
|
|
Long Skin
Description: Full length for cooler temperatures. Elastic waist with drawstring. Synthetic chamois saddle gives padded comfort Stretch Lycra material
Price:
$31.46
|
|
Seal Installer and Remover for Harley-Davidson Big Twin 70-Up
Description: Removes and installs cam seal without removing the cam cover Simple to use. Just mount tool in cover, screw in the 2 removing screws, turn center and out comes the cam seal. The new seal is pressed in with the same tool, square and flat for a no leak fit Will also remove cam cover from case 70-Up Big Twin single cam only
Price:
$85.92
|
|
Stud Installer Tool for Harley-Davidson
Description: This product can be used with Harley-Davidson 4-Speed Big Twin 36-86 Harley-Davidson 5-Speed Softail 85-99
Price:
$29.48
|
|
Mainshaft Sprocket Nut Socket Tool for Harley-Davidson
Description: Will easily remove and install the left hand threaded nut holding the transmission sprocket Heavy wall, 1/2 in drive socket comes with a pilot designed to thread onto the shaft to protect the threads of the mainshaft Made in USA This product can be used with Harley-Davidson Big Twin H-D#94660-37A 36-99 Harley-Davidson Twin Cam (Except 2006 Dyna) H-D#94660-37A 99-06
Price:
$111.84
|
|
Sticker-Off
Description: Sticker Off: adhesive remover removes residue after you remove stickers
Price:
$4.46
|
|
Sprocket Shaft Bearing Installation Tool for Harley-Davidson
Description: Installs sprocket shaft bearing and pulls lower end into left case This product can be used with Model Part # Harley-Davidson Sportster 77-Up SSBITHD-1 Harley-Davidson Buell 87-Up SSBITHD-1 Harley-Davidson Sportster 77-Up SSBITHD-2 Harley-Davidson Buell 87-Up SSBITHD-2 Harley-Davidson Big Twin H-D#97225-55 55-99 SSBITHD-3 Harley-Davidson K 52-00 SSBITHD-4 Harley-Davidson XL 52-00 SSBITHD-4
Price:
$23.12
|
|
T-Handle Removable Socket
Description: Three-way T-handle makes the perfect fanny pak tool features removable sockets and comes with 8 mm, 10 mm, 12 mm and 13 mm sockets Can be used with other socket sizes you have in your toolbox Macolm s new favorite fanny pak tool
Price:
$17.09
|
|
Camshaft Remover and Installer for Harley-Davidson Twin Cam 99-06
Description: Will remove and replace front and rear camshafts and ball bearings Provides the precision alignment of the camshaft to insure a smooth press in and out of the support plate 99-06 Twin Cam (Except 2006 Dyna)
Price:
$109.84
|
|
Alternator Rotor Removal and Installation Tool for Harley-Davidson
Description: This tool is a must have for 45 AMP charging systems Pulls the rotor free from its magnetic hold This product can be used with Harley-Davidson FL 97-Up Harley-Davidson Ultra models 97-Up
Price:
$72.44
|
|
Flywheel Rebuilding Crank Pin Nut Socket for Harley-Davidson
Description: All of JIMS sockets give 100% nut to socket contact and 100% of drive end contact, while being 1 in tall Machined flat at the nut receiving end to eliminate rounding off the nut and to reduce the risk of bodily injury Machined from 4130 chrome-molybdenum, then heat-treated to give a lifetime of service This product can be used with Model Part # Harley-Davidson Sportster H-D#23967-54A Nut 54-Early 81 FRCPNSHD-1 Harley-Davidson Sportster H-D #23901-81 Nut 81-00 FRCPNSHD-2 Harley-Davidson Big Twin H-D#23966-54A Nut 54-Early 81 FRCPNSHD-3 Harley-Davidson Big Twin Evolution (Except Twin Cam) H-D#23969-83 Nut 83-99 FRCPNSHD-4
Price:
$49.76
|
|
Steering Wrench
Description: Steering/ fork cap Wrench allows access with handlebars in place 12-point design on all steering/fork cap wrench for easier tool placement
Price:
$16.16
|
|
|
T-Handle Set
Description: Built from chrome vanadium tool steel for corrosion resistance and durability Includes 6, 8, 10, 12, 13, 14 and 17 mm socket sizes, as well as no.3 Phillips Comes with heavy duty vinyl carrying case
Price:
$37.76
|
|
Oil Pump Snap Ring Installer for Harley-Davidson Big Twin All
Description: Easily installs outer snap ring on oil pump shaft, without over stretching the ring Just apply oil to ring expander, slip ring up to the big end of ring expander, hold up to the end of the shaft, then push ring onto the shaft with sleeve All Big Twin oil pumps single cam only. Includes aftermarket and S&S motors
Price:
$40.52
|
|
Outer Primary Bearing Remover for Harley-Davidson
Description: This product can be used with Harley-Davidson Sporster All Harley-Davidson Big Twin All
Price:
$105.60
|
|
Fork Leg and Tube Holder Tool
Description: Holds fork legs and tubes for easy hands free servicing or re-building Mounts in a vise to hold the fork firmly during repair without causing damage to the fork assembly Will not scratch finishes Use on smaller or larger fork tubes with a maximum 2 in diameter
Price:
$72.68
|
|
Wire Twister
Description: Make quick, clean, professional safety wire twists. Jaws lock on wire for positive grip. Just pull and the wire twists automatically.
Price:
$26.06
|
|
Cam Bearing Puller Tool for Harley-Davidson
Description: Used to remove inner cam bearing without splitting cases Easily pulls bearings from cases while preventing rollers from coming out during removal This product can be used with Model Part # Harley-Davidson Big Twin (Except Twin Cam) 58-99 CBPTHD-1 Harley-Davidson Sportster 57-90 CBPTHD-2
Price:
$110.24
|
|
Rod Lapping Set for Harley-Davidson Big Twin All
Description: Arbor assembly includes 1-1/2 in and 1-5/8 in laps Use on all Big Twin models that have replaceable races. Includes aftermarket and S&S motors
Price:
$234.52
|
|
Cam Bearing and Bushing Alignment Tool for Harley-Davidson Big Twin 70-Up
Description: Check the alignment of cam bearing to cam cover bushing to well within 0.0003 in of centerline Any binding of this tool indicates misalignment of cam cover and/or bushing A must for engine builders 70-Up Big Twin with single cam only. Includes aftermarket and S&S motors
Price:
$52.60
|
|
Valve Guide Head Holder
Description: Valve Guide Remover and Installer Designed with a special guide alignment shaft. This shaft holds the right angle for the best possible guide installations Save time and money by installing the guides, in line, with the valve seats, time and time again - for much less seat grinding Adapters are supported by a support stand. Makes pressing valve guides in and out simple Comes with adapters to fit all Harley-Davidson and aftermarket heads
Price:
$383.24
|
|
Valve Guide Seal Tool for Harley-Davidson
Description: Use to properly install valve guide seals This product can be used with Harley-Davidson Sportster 84-00 Harley-Davidson Big Twin 84-00
Price:
$34.16
|
|
Transmission Main Drive Gear Bearing Tool for Harley-Davidson Big Twin 79-86
Description: Installs main bearing to the factory depth 79-86 Big Twin 4-Speed models
Price:
$56.40
|
|
Multi Tool Kit
Description: 2-way speed ratchet 8, 10, and 12 mm 6-point sockets 4, 5, and 6 mm allen heads No. 2 Phillips screwdriver and No. 2 slot head screwdriver Mounted in compact carrier
Price:
$19.76
|